BALTOSPOT CRAWLERS, GFC.../C Series

X-Ray generators for Crawlers

Embedded on a mechanical carrier, a crawler generator differs from a portable generator as the main power supply are batteries. They can also be used as standalone with dedicated adapter and used onshore for occasional operations. Built to sustain extremely harsh environment as in Pipelines business, these units can be used on many different chassis even customer′s designed.

BALTOSPOT for Crawlers series

The Baltospot for Crawlers series is once again the evidence of the long time expertise of BALTEAU NDT in building reliable, powerful, robust and highly compatible X-ray equipments used for Pipe inspections.

When buying an equipment from Balteau, you are certain of getting the best quality to price value. Thanks to our 100 years of continuous business under the same name as an independent
X-ray manufacturer, you rest assured that you′ll get a continuous support all through the very long lifetime of the equipment you bought.

Balteau NDT offers a complete assembly including the mechanical carrier, the well-known Balteau NDT X-ray generator, the chopper and a range of accessories in order to make the most out of this equipment.

For more information, see the file(s) below:

bro-crawler-en-r0.pdf

GFC160C Generator for Crawlers

The generator is driven by an electronic circuit board (the power components are cooled by forced air). Components can be readily installed in the crawler body and connected to its general circuitry. Any DC voltages within the range of 72 to 130v can be selected and applied to the generator.

An exclusive feature allows generator to operate at constant kV and mA no matter of the battery cycles. This feature ensures a stable dose output and guarantees image quality consistency all along the exposure time.

This specific process, is also improving not only the operating possibilities of the battery pack, thus much more exposures can be taken before the batteries are discharged, but also it improves the battery lifetime by a better management of discharge cycles.

For more information, see the file(s) below:

fly-gfc160c-en-r0.pdf

GFC200C Generator for crawlers

The generator is driven by an electronic circuit board (the power components are cooled by forced air). Both components can be readily installed in the crawler body and connected to its general circuitry. Several DC voltages within the range 72 130 can be selected and applied to the generator.

An exclusive feature allows generator to operate at constant kV output while tube mA decreases with battery discharge with the CF3 control unit. This feature greatly improves crawler endurance by maintaining optimum exposure time regardless of battery discharge level. This is achieved as a result of the time being continuously readjusted according to the mA value.



I want more info...


For more information, see the file(s) below:

fly-gfc200c-en-r0.pdf

GFC300C Generator for crawlers

The generator is driven by an electronic circuit board (the power components are cooled by forced air). Both components can be readily installed in the crawler body and connected to its general circuitry. Several DC voltages within the range 72 130 can be selected and applied to the generator.

An exclusive feature allows generator to operate at constant kV output while tube mA decreases with battery discharge with the CF3 control unit. This feature greatly improves crawler endurance by maintaining optimum exposure time regardless of battery discharge level. This is achieved as a result of the time being continuously readjusted according to the mA value.



I want more info...


For more information, see the file(s) below:

fly-gfc300c-en-r0.pdf

CF3 Control unit for crawlers

A generator needs a power supply for working. With a Crawler, this power supply is brought by a battery set embarked in the mechanical carrier. The CF3 is the power converter (Chopper) between the batteries and the Generator. However the CF3 is also an intelligent regulator which will be able to give out of your batteries the most stable and constant output all along your exposures. Our Chopper CF3 is the result of the technology evolution that is applicable in electronics nowadays.

Based on the well known CF1 that has equipped several generations of Crawlers around the globe, this new model has also been developed to be used with the major brands of Crawler Manufactures



I want more info...


For more information, see the file(s) below:

fly-cf3-en-r2.pdf


top page TOP
Home - Site Map - Contact
Design, update & development © Copyright 2006, Balteau NDT.
Any copy, reproduction or links made without express written permission is strictly prohibited