TUBEHEADS Series



Choosing the right tube is very important. Indeed it is one of the most important element of your equipment. Balteau is offering a large variety of tubeheads that can be recognized and connected to our generators but can also be installed on your own product. Two mains types are available monopolar and bipolar.

TUBEHEADS

For more than 20 years BALTEAU is proposing a very wide selection of qualified, approved and certified tubeheads for the use in as many applications as those existing in Metallic, Non metallic, Industrial, Art a or even Researches fields.

By selecting the highest grade of components, the safest standards BALTEAU is offering it′s customer an unequalled solution to the different beams and outputs requirements. All tubeheads presented in this brochures are tested according to our and to major standards applicable in the different field of applications. No compromises are made and we give you our full guarantee when delivering our tubeheads tested and seasoned, ready to be used off the shelf.

BALTEAU is also offering a calibration service and characteristics checks on demands according to International standards or your precise requirements.

For more information, see the file(s) below:

bro-tubeheads-en-r0.pdf

TSC160 - Panoramic X Ray tube for XSD & XMD

The TSC160 is the Panoramic version of the Directional universal Monopolar tube for light alloys, composites or small to medium steel thicknesses.
With a power of up to 1 kW and a diameter of 100 mm this is the ideal candidate for tank inspections or hollow components with small inner diameters.

The tube shielding is internal and reduces the radiation leakage to less than 1 R/h @ 1 m as required by International standards. In and out fluid inlets are mounted with universal connectors while the HV plug cone is a R24.

This tube can be used with all brands of generators provided that the load curve can be adapted. See our specialists if you intend to connect this tube to another unit than a BALTEAU.



I want more info...


For more information, see the file(s) below:

fly-tsc160-en-r0.pdf

TSC 200-0 - Panoramic Monopolar tube

The TSC200/0 is a panoramic monopolar tube specifically developped by Balteau NDT. Designed for the inspection of pneumatic, tank or all other hollow components.This tube is particulary suitable for the applications using optical increase, light material, from small to medium thicknesses or still for the radioscopy.
The maximum outside diameter of the shaft makes hardly 150mm. The tube can thus be used in restricted spaces. The HV cable maybe either angled, or straight with an R24 standard connector. This tube can be used with all brands of generators provided that their load curves can be adapted.



I want more info...


For more information, see the file(s) below:

fly-tsc200-0-en-r0.pdf

TSD160/0 - Directionnal tube for XSD & XMD

The TSD160/0 is a universal Monopolar tube for light alloys, composites or small to medium steel thicknesses. Due to the combination of a large and a small focus into the same tube, the tube is ideal for all purposes applications where either power or definitions may be required. The large focus allows you to drive up to 3 kW power for applications where thicknesses are high or material is highly absorbent. The small focus will be preferred for applications with magnification of on very light material and thicknesses or with a radioscopic application.

The outside diameter of the housing is barely 100 mm which will ensure that the tube can be inserted even in tiny spaces. The tube shielding is internal and reduces the radiation leakage to less than 1 R/h @ 1 m as required by International standards. In and out fluid inlets are mounted with universal connectors while the HV plug cone is a R24.

This tube can be used with all brands of generators provided that the load curve can be adapted. See our specialists if you intend to connect this tube to another unit than a BALTEAU.



I want more info...


For more information, see the file(s) below:

fly-tsd160-0-en-r0.pdf

TSD160/1 - Directionnal fine focus tube for XSD &

The TSD160/1 is a universal Monopolar tube for light alloys, composites or small steel thicknesses. This tube is a compromise between a very fine and a fine focus application and is generally selected by users whose applications are not requiring a very high dose output either because distances to detector are generally short or because materials are not thick or very dense. This tube is perfectly adapted to Radioscopy applications or low power generators (< 1,6 kW).

The outside diameter of the housing is barely 100 mm which will ensure that the tube can be inserted even in tiny spaces. The tube shielding is internal and reduces the radiation leakage to less than 1 R/h @ 1 m as required by International standards. In and out fluid inlets are mounted with universal connectors while the HV plug cone is a R24.

This tube can be used with all brands of generators provided that the load curve can be adapted. See our specialists if you intend to connect this tube to another unit than a BALTEAU.



I want more info...


For more information, see the file(s) below:

fly-tsd160-1-en-r0.pdf

TSD160/3 - Directionnal tube dual small filament

The TSD160/3 is a Monopolar tube designed for radioscopy installations or for applications where working cycle is extremely important. Indeed, the tube is mounted with two identical small size filaments adapted to the radiography or radioscopy of light alloys, composites or small steel thicknesses. One filament can be considered as a spare of the other one and due to the fact that sizes are identical, can replace a broken filament without the need of
re-qualification of the technique or a change in the parameters.

The outside diameter of the housing is barely 100 mm which will ensure that the tube can be inserted even in tiny spaces. The tube shielding is internal and reduces the radiation leakage to less than 1 R/h @ 1 m as required by International standards. In and out fluid inlets are mounted with universal connectors while the HV plug cone is a R24.

This tube can be used with all brands of generators provided that the load curve can be adapted. See our specialists if you intend to connect this tube to another unit than a BALTEAU.



I want more info...


For more information, see the file(s) below:

fly-tsd160-3-en-r0.pdf

TSD 160/5 - High energy tubehead

The TSD 160/5 is a universal Monopolar tube for light alloys, composites or for small to medium steel thicknesses. Thanks to its small focal spot, this tube is convenient for applications where power and precision are required. As it is dual focal spot, the large focal spot allows you to reach until 1.8 kw which is suitable for applications where thicknesses are relatively important or for absorbing materials. The small focal spot will be adapted for applications using an optical magnification, for light material, small steel thicknesses or even for radioscopy.

The outside diameter of the housing is barely 100 mm which will ensure that the tube can be inserted even in tiny spaces. The tube shielding is internal and reduces the radiation leakage to less than 1 R/h @ 1 m as required by International standards. In and out fluid inlets are mounted with universal connectors while the HV plug cone is a R24.

This tube can be used with all brands of generators provided that the load curve can be adapted. See our specialists if you intend to connect this tube to another unit than a BALTEAU.

For more information, see the file(s) below:

fly-tsd160-5-en-r0.pdf

TSD225/0 - High power dual filament directionnal

The TSD225/0 is the highest capacity Monopolar tube of our range. It is designed to be used on light alloys, composites or medium steel thicknesses. One large filament can be used for high power applications (3 kW) and high dose demanding applications while the small focus will be ideal for high definition radiographies at reduced distances. The TSD225/0 is generally highly sufficient for the majority of standard industrial applications and is giving the advantage of still being Monopolar.

Slightly larger than a 160 tube, the housing diameter is only 124 mm which will ensure that the tube can still be inserted even in tiny spaces. The tube shielding is internal and reduces the radiation leakage to less than 1 R/h @ 1 m as required by International standards. In and out fluid inlets are mounted with universal connectors while the HV plug cone is a R24.

This tube can be used with all brands of generators provided that the load curve can be adapted. See our specialists if you intend to connect this tube to another unit than a BALTEAU.



I want more info...


For more information, see the file(s) below:

fly-tsd225-0-en-r0.pdf

TSD225/1 - Dual filament all purpose directionnal

The TSD225/1 is a compromise between high and low power at 225 kV which allows you a wide range of applications from light alloys and plastics to medium walled steel products. Focal spot sizes are offering the possibility to operate either in standard radiography or in radioscopic applications. The small size filament is also allowing applications with slight magnifications. The TSD225/1 is generally highly sufficient for the majority of standard industrial applications and is giving the advantage of still being Monopolar.

Slightly larger than a 160 tube, the housing diameter is only 124 mm which will ensure that the tube can still be inserted even in tiny spaces. The tube shielding is internal and reduces the radiation leakage to less than 1 R/h @ 1 m as required by International standards. In and out fluid inlets are mounted with universal connectors while the HV plug cone is a R24.

This tube can be used with all brands of generators provided that the load curve can be adapted. See our specialists if you intend to connect this tube to another unit than a BALTEAU.



I want more info...


For more information, see the file(s) below:

fly-tsd225-1-en-r0.pdf

TSD 225/3 - Dual filament Monopolar tube

The TSD225/3 is a very small focus dual filament Monopolar tube for light alloys, composites or small steel thicknesses. The extremely small size of the small filament is designed for applications with magnifications or where definition is of first importance. This tube can be the ideal replacement of a µ Focus solution if the dose output of the µ Focus is not sufficient to cancel the natural noise of X-ray photons. This tube is perfectly adapted to Radioscopy applications or low power generators.

Slightly larger than a 160 tube, the housing diameter is only 124 mm which will ensure that the tube can still be inserted even in tiny spaces. The tube shielding is internal and reduces the radiation leakage to less than 1 R/h @ 1 m as required by International standards. In and out fluid inlets are mounted with universal connectors while the HV plug cone is a R24.

This tube can be used with all brands of generators provided that the load curve can be adapted. See our specialists if you intend to connect this tube to another unit than a BALTEAU.



I want more info...


For more information, see the file(s) below:

fly-tsd225-3-en-r0.pdf

TSD225/4

The TSD225/4 is a compromise between high and low power at 225 kV which allows you
a wide range of applications from light alloys and plastics to medium walled steel products.
Focal spot sizes are offering the possibility to operate either in standard radiography or in
radioscopic applications. The small size filament is also allowing applications with slight
magnifications. The TSD225/4 is generally highly sufficient for the majority of standard
industrial applications and is giving the advantage of still being Monopolar.
Slightly larger than a 160 tube, the housing diameter is only 124 mm which will ensure
that the tube can still be inserted even in tiny spaces. The tube shielding is internal and
reduces the radiation leakage to less than 1 R/h @ 1 m as required by International
standards. In and out fluid inlets are mounted with universal connectors while the HV
plug cone is a R24.
This tube can be used with all brands of generators provided that the load curve can
be adapted. See our specialists if you intend to connect this tube to another unit than a
Balteau.

For more information, see the file(s) below:

fly-tsd225-4-en-r0.pdf

TSD320/0 - General purposes dual filament direct.

The TSD320/0 is the first tube of the Bipolar range. This tube has a big amount of power available and is designed for medium to heavy walled steel thicknesses applications. Driven by the adequate generator it can also be used in light alloys and composites materials. With a power of up to 4 kW on the large filament this tube helps you reducing your film exposures durations or achieve superior thicknesses in reduced times. The second filament will provide an alternative for higher definition radiographies or radioscopic applications.

The tube shielding is internal and reduces the radiation leakage to less than 1 R/h @ 1 m as required by International standards. In and out fluid inlets are mounted with universal connectors while the two HV plug cones are R24.

This tube can be used with all brands of generators provided that the load curve can be adapted. See our specialists if you intend to connect this tube to another unit than a BALTEAU.



I want more info...


For more information, see the file(s) below:

fly-tsd320-0-en-r0.pdf

TSD320/2 - Small focus dual directionnal

The TSD320/2 is a compromise of power and small size filaments. If the need of power is lower than 1,6 kW, this tube will help you gaining definition in medium to heavy walled applications. Equipped with two independent filaments, this tube allows you to drive up to 1,6 kW on the large filament while the small size filament will give you enough power to perform the majority of higher definition applications even at 320 kV.

The tube shielding is internal and reduces the radiation leakage to less than 1 R/h @ 1 m as required by International standards. In and out fluid inlets are mounted with universal connectors while the two HV plug cones are R24.

This tube can be used with all brands of generators provided that the load curve can be adapted. See our specialists if you intend to connect this tube to another unit than a BALTEAU.



I want more info...


For more information, see the file(s) below:

fly-tsd320-2-en-r0.pdf

TSD 320/3 - High energy tubehead

The TSD320/3 is a high energy tubehead able to provide high power even on small size filaments. This tube will help you gaining time and definition in medium to heavy walled applications. Equipped with two independent filaments, this tube allows you to drive up to 1,8 kW on the large filament while the small size filament will give you enough power to perform the majority of higher definition applications even at 320 kV.

The tube shielding is internal and reduces the radiation leakage to less than 1 R/h @ 1 m as required by International standards. In and out fluid inlets are mounted with universal connectors while the two HV plug cones are R24.

This tube can be used with all brands of generators provided that the load curve can be adapted. See our specialists if you intend to connect this tube to another unit than a BALTEAU.



I want more info...


For more information, see the file(s) below:

fly-tsd320-3-en-r0.pdf

TSD320/5

The TSD320/5 is a tube of the Bipolar range. This tube has a big amount of power available and is designed for medium to heavy walled steel thicknesses applications. Driven by the adequate generator it can also be used in light alloys and composites materials. With a power of up to 4 kW on the large fi lament this tube helps you reducing your fi lm expo-
sures durations or achieve superior thicknesses in reduced times. The second fi lament will provide an alternative for higher defi nition radiographies or radioscopic applications.
The tube shielding is internal and reduces the radiation leakage to less than 1 R/h @ 1 m as required by International standards. In and out fl uid inlets are mounted with universal connectors while the two HV plug cones are R24.
This tube can be used with all brands of generators provided that the load curve can be adapted. See our specialists if you intend to connect this tube to another unit than a Balteau.

For more information, see the file(s) below:

fly-tsd320-5-en-r0.pdf

TSD420-OA

The TSD420/0A is introducing the series of one of the highest powerful tubes
manufactured by BALTEAU. This tube doesn’t offer a compromise to power neither
to fl exibility but is designed for heavy walled and highly absorbing applications mainly.
Two independent fi laments are giving the possibility to perform inspections up to 4,5
kW on the large fi lament. Thanks to its beryllium window this tube also delivers soft
X-rays for light materials or improved radiographic techniques.
The tube shielding is internal and reduces the radiation leakage to less than 10 R/h
@ 1 m as required by International standards. In and out fl uid inlets are mounted with
universal connectors while the two HV plug cones are R28.
This tube can be used with all brands of generators provided that the load curve can
be adapted. See our specialists if you intend to connect this tube to another unit than
a Balteau.

For more information, see the file(s) below:

fly-tsd420-0a-en-r0.pdf

TSD450/0 - All purpose dual filament

The TSD450/0 is introducing the series of the highest powerful tubes manufactured by BALTEAU. This tube doesn′t offer a compromise to power neither to flexibility but is designed for heavy walled and highly absorbing applications mainly. Two independent filaments are giving the possibility to perform inspections up to 4 kW on the large filament. Thanks to its beryllium window this tube also delivers soft X-rays for light materials or improved radiographic techniques.

The tube shielding is internal and reduces the radiation leakage to less than 1 R/h @ 1 m as required by International standards. In and out fluid inlets are mounted with universal connectors while the two HV plug cones are R28.

This tube can be used with all brands of generators provided that the load curve can be adapted. See our specialists if you intend to connect this tube to another unit than a BALTEAU.



I want more info...


For more information, see the file(s) below:

fly-tsd450-0-en-r0.pdf

TSD450/0C - All purpose dual filament

The TSD450/0 is introducing the series of the highest powerful tubes manufactured by BALTEAU. This tube doesn′t offer a compromise to power neither to flexibility but is designed for heavy walled and highly absorbing applications mainly. Two independent filaments are giving the possibility to perform inspections up to 4 kW on the large filament. Thanks to its beryllium window this tube also delivers soft X-rays for light materials or improved radiographic techniques.

The tube shielding is internal and reduces the radiation leakage to less than 1 R/h @ 1 m as required by International standards. In and out fluid inlets are mounted with universal connectors while the two HV plug cones are R28.

This tube can be used with all brands of generators provided that the load curve can be adapted. See our specialists if you intend to connect this tube to another unit than a BALTEAU.

For more information, see the file(s) below:

fly-tsd450-0c-en-r0.pdf

TSD 450-2 - All purpose dual filament

The TSD450/2 is introducing the series of the highest powerful tubes manufactured by BALTEAU. This tube doesn′t offer a compromise to power neither to flexibility but is designed for heavy walled and highly absorbing applications mainly. Two independent filaments are giving the possibility to perform inspections up to 1,5 kW on the large filament. Thanks to its beryllium window this tube also delivers soft X-rays for light materials or improved radiographic techniques.

The tube shielding is internal and reduces the radiation leakage to less than 1 R/h @ 1 m as required by International standards. In and out fluid inlets are mounted with universal connectors while the two HV plug cones are R28.

This tube can be used with all brands of generators provided that the load curve can be adapted. See our specialists if you intend to connect this tube to another unit than a BALTEAU.



I want more info...


For more information, see the file(s) below:

fly-tsd450-2-en-r0.pdf


top page TOP
Home - Site Map - Contact
Design, update & development © Copyright 2006, Balteau NDT.
Any copy, reproduction or links made without express written permission is strictly prohibited