BALTOMATIC Series

Real time radiography (RTR) systems

Basically a BALTOMATIC is an enclosure in which any kind of our generators or detectors can be mounted. Shielding of enclosures and power supplies are all integrated according to the application to be fulfilled. BALTEAU offers an extended range of products dedicated to the inspection of different kinds of Products. Automatic Inspection Systems (AIS) are existing for various industries; agriculture (seeds sorting, biology (cell irradiation), security, casting, foundry, training centers, ...

BALTOMATIC Series

A System is an independent unit that is designed to perform inspections tasks in manual, semi or automatic mode with or without the assistance of an operator. It is generally a combination of several elements interconnected together going from the Shielded enclosure to the manipulator and the Imaging software for digital solutions.

BALTEAU NDT is known for it’s long tradition in the manufacture of X ray units and as a solution provider in systems for about 100 years. Systems built by BALTEAU NDT can either be unique as sometimes your products are or built as small series for general purposes applications. BALTEAU is indeed specialised in providing THE adequate and customised solution to simple or complex products.

The Baltomatic series is showing you a basic overview of what has been produced by BALTEAU in the recent years and all Systems presented in this brochure can be adapted or modified to fit exactly into your own requirements.

For more information, see the file(s) below:

bro-baltomatic-en-r3.pdf

AIS201 Inspection system for domestic gas bottles

The AIS201 is a Real Time Radiography (RTR) inspection system especially designed for the control of welded cylinders.

This cost effective inspection system will drastically cut down the inspection time and cost, thanks to its motorized (automatic optional) handling 5 axis manipulator.

The XSD160 is a stationary constant potential X-ray generator specially suited to the RTR inspection, thanks to its high dose stability.



I want more info...


For more information, see the file(s) below:

fly-ais201-en-092006-r0.pdf

AIS202 Manual gas bottle inspection system

The AIS202 gas bottle inspection system is especially designed to meet the needs of manufacturers who request a manual, reliable and efficient cylinder welding inspection system.

This shielded cabinet protects from X-ray radiations in compliance with the most stringent regulations:
0,5 µSv/h @ 10 cm from the surface for non professionals.

The cabinet is equipped with one large door for loading/unloading, installation and maintenance.

Our entire range of directional BALTOSPOT portable generators, driven by the CF2000 or the Hand-X control unit, can be fitted with the AIS202.



I want more info...


For more information, see the file(s) below:

fly-ais202-en-092006-r0.pdf

AIS228 Inspection of weld samples and castings

The AIS228 is a very compact equipment that provides you with numerous advantages. A wide variety of samples as well as different thicknesses can be inspected with this unit. This shielded cabinets includes, as irradiating source, a directional X-ray generator from the very well-known and efficient Baltospot range. These cabinets are generally made of a steel structure with lead reinforcement to assure a proper shielding against radiation outside of the confined area ("sandwich" type assembly : steel-lead-steel).
This user-friendly equipment can be very easily operated with a maximum safety.

For more information, see the file(s) below:

fly-ais228-en-r1.pdf

AIS228X Inspection of welded samples and castings

The AIS228X is the powerful version of the AIS228. It is a very compact equipment that provides you with numerous advantages. A wide variety of samples as well as different thicknesses can be inspected with this unit. This shielded cabinet includes, as irradiating source, a directional X-ray tubehead and a generator from the very well-known and efficient Baltograph range. These cabinets are generally made of a steel structure with lead reinforcement to assure a proper shielding against radiation outside of the confined area ("sandwich" type assembly : steel-lead-steel).
This user-friendly equipment can be very easily operated with a maximum safety.

For more information, see the file(s) below:

fly-ais228x-en-r0.pdf

LS1C2

The LS1C2 is the ultimate OEM version for Systems Integrators. This version is delivered with its control protocol which includes all the basics commands to set up and perform X-ray exposures.

The LS1C interfacing with PC software allows you to manage from the preparation (preheating, modes, etc…) to the X-ray exposure.

The System integrator is then free to design its Generator/LS1C interface according to its own standards while using the protocol and commands supplied with the unit.

All the features developed on the regular LS1 such as the automatic recognition of BALTOGRAPH generators and TSC/TSD tubeheads, diagnostic and the maintenance modes are also presents through the independent Graphic interface of the LS1C.

For more information, see the file(s) below:

fly-ls1c2-en-r0.pdf

CLMT

X-ray beam size and shape is defined by the inherent construction of the Tube. The way the target is positioned, the shielding and housing designs are largely influencing the beam cone, but this is fixed and sometimes not adequate to the imaging detector or Shielding environment. The use of a collimator is then very useful when you want to precisely control the cone shape and extent.
The collimator acts as a mobile window reducing or defining the limits of the beam to the detector sizes or portion of area to be covered.
Made out of highly absorbing material, shutters are remotely moved with electric motors operated from the control room.

For more information, see the file(s) below:

fly-clmt-en-r0.pdf

AIS958 - Automatic Inspection System for welding

The AIS958 is a very compact complete digital x-ray system. A wide variety of
samples with different thicknesses can be inspected with this unit.
This shielded cabinet includes a directional constant potential generator of 160 kV
or 225 kV as well as a fl at panel. The AIS958 is associated with our «Inspection
Suite» of softwares, including our image processing software IPS012.
Thanks to the 5 axis motorized manipulator, the user has the opportunity to radiograph
a sample from all angles and thus, achieve a complete inspection.
The cabinet is made of a steel structure with lead reinforcement to assure a
proper shielding against radiation outside of the confi ned area. (“sandwich” type
assembly : steel-lead-steel).
In addition to being complete, the AIS958 can be mobile with its installation in a
trailer (optional). This allows the user to move over a wide area and thus respond
quickly and effectively to customer requests.

For more information, see the file(s) below:

fly-ais958-en-r2.pdf

AIS229

MULTIPURPOSE REAL TIME SYSTEM MECHANICAL DRAWING X-RAY SOLUTION
Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a flat panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.

Equipped with the latest version of the Inspection suite, it will facilitate and accelerate the everyday inspection jobs allowing to record motions and to automate the inspection. The operator will also be able to process the image with the IPS012 Image Processing Software.

For more information, see the file(s) below:

fly-ais229-en-r0.pdf

AIS500

First real time system developed by Balteau including a ADR module and completely made to work on production line. The AIS500 has been designed to do automated inspection in a wide variety of industry for component from small to middle size. thanks to the bar code scanners on both ends, the AIS500 will recognize the component and start the inspection without any action from the end user, automting completely the process. Composed of a shielded cabinet, a manipulator, conveyors In & out, an x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS500 is the answer to any business who wants to inspection their components from their production line at any stages of the manufacturing.

For more information, see the file(s) below:

fly-ais500-en-r0.pdf


top page TOP
Home - Site Map - Contact
Design, update & development © Copyright 2006, Balteau NDT.
Any copy, reproduction or links made without express written permission is strictly prohibited